SB 44*62*8 Gearbox Seal
| Action method | Rotary |
|---|---|
| Size or OEM number | SB 44*62*8 |
| Type | SB |
| I.D | 44 |
| O.D | 62 |
| H | 8 |
| Pressure | 7.5 Psi |
| Speed | up to 35 m/s |
Scrapers Seals are installed in the sealing configurations of hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the system.
- Pressure: ≤ 350 Bar
- Sliding speed: ≤ 15 m/s
- Temperature: -150°C ~ 225°C
Scrapers Seals are installed in the sealing configurations of hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the system.
- chrome coatings solidified through non-uniform wear
- plastic materials resulting from low thermal conductivity, which can lead to a disturbance in the transport of heat, an increase in temperature in friction areas with the shaft seal, as well as a potential softening
Scrapers Seals are installed in the sealing configurations of hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the system.
- chrome coatings solidified through non-uniform wear
- plastic materials resulting from low thermal conductivity, which can lead to a disturbance in the transport of heat, an increase in temperature in friction areas with the shaft seal, as well as a potential softening
| Piston diameter | Groove Bottom | Groove Width | Gap | Radius | Equivalent O-Ring Cord | O-Ring code |
|---|---|---|---|---|---|---|
| Da | Da | L | T | R | Thickness | - |
Scrapers Seals are installed in the sealing configurations of hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the system.
| Reference | Compound | Color | Temp. °C (MIN.) |
Temp. °C (MAX.) |
Application | Characteristics | Products |
|---|---|---|---|---|---|---|---|
| 01T | VIRGIN PTFE | WHITE | -190 | 220 |
|
|
|
| Material | Cantilever Spring | Canted Coil Spring | Helical Spring | Full Contacted Spring |
|---|---|---|---|---|
| 301 Stainless Steel | Standard | Standard | Standard | Standard |
Scrapers Seals are installed in the sealing configurations of hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the system.
Scrapers Seals are installed in the sealing configurations of hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the piston rods as they retract into the system.
